Wewon is the globe ′ s most advanced Benchtop temperature forcing systems. It was created especially for procedures in semiconductor research laboratories, and also thus, it is designed to be as compact as well as silent as possible (50Dba). FlexTC is a very durable system as well as it can run 24/7 over long periods […]
- September 21, 2020
- Caroline Yang
- Comments Off on How To Get People To Like Rapid Temp Change Test Chamber.
In order to promote the manufacturing line workers less complicated to carry out product test, Wewon Environmental Chambers Co., Ltd. has created a brand-new type rapid temp change test chamber for high quality evaluation and product research. The rapid temp change test chamber mainly made use of for optical communication component, semiconductor chip’s reliability and efficiency test solutions.
Via the glove box sleeves, the employee who deal with production line can inspect the top quality of the tested samples online throughout the test, This way will not impact its temperature and humidity changes. Long period of time low temperature operation, the test room with no frost even the device competes a very long time. An LED light is set up on the top of the sight window to clearly observe the example detection circumstance in the test room.
The Wewon’s rapid temp change test chamber is geared up with 2 1.5 kW French Tecumseh compressors, Cooling capacity temperature change rate can be 3 ℃/ min. The machine can execute on-line product quality inspection task according to the defined temperature change rate. The quantity and wind speed will certainly be changed automatically, This makes the temperature in the test room is evenly dispersed. Via an electronic expansion valve, The surface area temperature distinction of the examined product is suppressed, and the linear control precision is understood.
Rapid temp change test chambers preferred used for 5G optical component, optical fiber communication components. Almost all optical tools need to go through high and low temperature cycle test prior to they leave the factory. Each product has a different coefficient of thermal expansion. The failing risk of various materials can be tested just under radical temperature changes.
For +85 ℃ and -40 ℃ temperature test, It has to remain long enough for the device to reach ambient temperature. rapid temperature adjustments additionally cause greater stress and anxiety on the evaluated product. When the load is more than 100 Kg, Linear 15 ℃/ min, with lots in the heating and cooling procedure, Test room’s temperature deviation within ± 2.0 ℃.
Rapid temp change test chamber’s Usage: The tools is mainly used for the steel products of digital products and their adaptability test and anxiety screening test under the substitute climate condition of rapid change or progressive change of temperature, Test and court the physical and various other associated residential properties of the product. There no requirement to close the door or open up, the checked sample can be put in or taken out easily through the procedure opening.
Wewon’s environmental chamber with glove ports can be used long period of time online with low-temperature procedure without thawing in the test room. It is considerably boost the performance of manufacturing testing (The normal environmental chambers need to be heated up and thawed, and after that aligned to cool, which is unquestionably lengthy and power-consuming).
Wewon’s environmental glove chamber with huge and intense monitoring window with broad field of view: adopts three-layer vacuum finish window and energy-saving fluorescent light, does not require wipers to defog, maintains a clear observation impact in the gloveboxes environmental chamber, and can observe the condition of the sample in the swiftly temperature change test chamber at any time.
Gloveboxes environmental chamber from Wewon Environmental Chambers Co., Ltd. pick the touch display control method to record the temperature (humidity) curve in real-time operation of the experiment, which can be from another location regulated and taken care of through the computer system software application. test standard for glovebox iris port temperature cycle test chamber adhere to GB/T2423.22, IEC 60068-2-14, JESD 22-A104-D, JESD 22-A105-C.
In order to facilitate the production line workers simpler to bring out product testing, Wewon Environmental Chambers Co., Ltd. has actually created a brand-new model rapid temp change test chambers for top quality inspection and product study. The rapid temp change test chamber generally utilized for optical communication component, semiconductor chip’s reliability and performance test solutions. With the glove box sleeves, the worker who function on production line can check the quality of the examined samples online throughout the test, This method will certainly not affect its temperature and humidity variations. The Wewon’s rapid temp change test chamber is equipped with two 1.5 kW French Tecumseh compressors, Cooling ability temperature change rate can be 3 ℃/ minutes. For +85 ℃ and -40 ℃ temperature test, It has to remain long sufficient for the gadget to get to ambient temperature.